MBF 400/100C

This machine with a clamping force of 1000kN, a clamping unit from the top and a rubber injection unit from the bottom represents the larger version of MAPLAN C-frame series without objectionable tie bars, which makes it easy to assemble / reassemble the mould.

The series production of smaller rubber parts and corner joint production are the typical industrial applications for the MAPLAN C-frame series. Due to the larger clamping plates demanding applications are already possible.

Machine equipment

Standard equipment: Options:

• Microprocessor-control PC50touch

• Hydraulic pump with proportional pressure/flow

control

• Linear positioning system for ejector injection

and clamp side

• Cooling unit (Thermo oil) for plasticizing cylinder and

nozzle including temperature control

• Certified injecting precision

• 2-hand operation

• Nozzle cooling

• Hydraulic ejector injection and/or clamp side

• Pneumatically operated safety gate on 3 sides

• Heating device (water or oil) for plasticizing cylinder

and injection pot, including temperature control

• Vacuum pump

• Cold runner

• Electric oil temperature monitoring

• Electric oil level monitoring

• Electric oil filter monitoring

• Electric back pressure

• Current monitoring

• Automatic strip intake

• Strip intake control

• Additional mould heating zones

• Increased heating plates

• Customer-specific versions

• Leveling feet

• Fast hydraulics (from 27 t)

• Alternative injection volumes

Technical data/Dimensions:

Clamping unit			Injection units		400	530
Opening stroke	mm	290	Max. injection volume	cm³	400	530
Opening between plates	mm	410	Max. injection pressure	bar	1945	1465
Clamping force	kN	1034	Max. injection capacity	cm³/sec	82	110
Opening force	kN	96	Screw diameter	mm	27	27
Clamping speed fast	mm/sec	115	Screw ratio	L/D	10 D	10 D
Opening speed fast	mm/sec	72	Max. Screw speed	rpm	220	220
Min. mould height	mm	120	Temperature zones		3	3

Electric equipment			Hydraulic unit
Motor rating	kW	22	System pressure	bar	260
Heating plates	kW	12,2	Pump output	l/min	107
Control voltage	V	24 V=
Connected load°	kW	37
Machine weight	kg	5800

° without additional heating and cooling/heating devices

values for 50Hz, subject to technical modifications

There are available options like brush devices, Logical movements, Cure² and further more.
For further Information please complete the contact form.